Wednesday, January 27, 2010

A Fork in the Road

I recently received the news that SVA is not going to offer the Advanced Special Effects Make-Up class that I was hoping to enroll in. Unfortunately, they didn't get enough students interested to warrant offering the class. My one option is to enroll in the Basic class again and work off to the side with a few of the other folks that expressed interest.



That being said, I don't think I can quite afford the whole bundle and time commitment again. I think with some discipline I can take what I've learned and continue to experiment with what I've previously taught myself by using the money and time I would've invested in SVA into new tools and materials for my own projects. I've taken a few short tutorials at Compleat Sculptor before and I am considering it again. Pictured are the workshops I'm considering.




The tricky thing is that for all the artistry and methodical techniques I've encountered and continue to learn, it's all a bit of fun and games to me. I look at action figures and overpriced sculpted busts in toy stores and comic shops and can't help think, "I can make that." I've found myself pausing the carnage and sci-fi elements of all my DVDs lately to critique the craftsmanship. Basically, I'm saying, I'm just having fun with this, and I'm not entirely sure which way to take it. I'm note sure if I will ever be paid to do what I'm crafting, but I'm not sure if it's art either. I like to draw and paint and craft things from bits of trash I find. I like to cut things up and put them together again. This is just a classic case of good intentions coupled with manic energy meeting a lack of direction. I just hope it doesn't develop into regret and further frustration. I am realizing I need a new project to take me to the next plateau.




I recently unearthed a few story boards I did for a friend. He was crafting a short film about mobsters, hit men, and a zombie's revenge. Looking over them I realised I should revisit some of these. If not for the story that died on the vine, but maybe to help someone else with their vision; to offer what talent others think I have to birth their visions. Perhaps that is where I'll figure out what comes next.

I used pen, sharpie, and water color to craft the storyboards on heavy stock paper that's roughly 5" by 7". It's style was very fueled by Brian Azzarello's 100 Bullets drawn by Eduardo Risso. I'll post one storyboard now and use it as motivation to draw for other projects. I will continue to post more storyboards until you all have the entire series I did for the short.

Here he is; BOSS MAN.



He's definitely got a Paul Sorvino as a Teamster vibe. Maybe you think it's crap, but I have to hope it can only get better from here.

More to come.

Monday, January 18, 2010

Reaching Out and Helping Out

I've recently been accepted as an artist's assistant for the new Gropius Master Artist series at the Huntington Museum of Art in Huntington, West Virginia. It's a tad different from my recent endeavors, but I feel it will help bolster my work as an artist. I hope to gain a wider perspective and appreciation of my artwork by helping and instructing others with theirs.

The Walter Gropius Master Artists Series brings nationally and internationally recognized artists to the Huntington Museum of Art to inspire artists, educators and students through lectures, exhibitions, and workshops.

Upcoming Gropius Master Artists:

Matt Madden and Jessica Abel




Three-day workshop: Friday and Saturday 9 a.m. - 4 p.m., Sunday 9 a.m.- noon scheduled February 26-28, 2010.

Public Presentation is a gallery walk on Sunday, February 28 at 2:00 p.m.

The exhibition will be up from February 20 – May 23, 2010


Workshop description:

Drawing Words & Writing Pictures: A Comics Workshop

In this intensive workshop, Jessica Abel and Matt Madden teach the principles of comics language-a mixture of drawing, writing, and design all marshaled in the service of storytelling. Making comics requires creators to think fluidly of words and images, to smudge the boundaries, and artfully blend the two usually distinct forms of communication to create a synchronized whole. We truly draw words and write pictures: Drawing words means to think of the letterforms as a part of the visual language of the comic. Writing pictures means to think of the images as carrying meaning much like language does. Comics has been compared to calligraphy in the blending of word and image, and to music notation in the visual notation of time passing and emotion written in ink. Participants will learn how to make comics through a series of short activities and exercises, reading, and finally writing and drawing a one-page comic.





To register for this workshop or for fee information, call (304) 529-2701, Ext. 21. or e-mail bboston@hmoa.org or kcox@hmoa.org

For more information on Walter Gropius Master Artists Series workshops and Matt Madden and Jessica Abel, please visit the website: www.hmoa.org.

If anyone is in the area and/or interested in the workshop, I'll be there to lend a helping hand.

Tuesday, January 5, 2010

My Zombie Girlfriend and Finals

It's been quite a journey to get to this point.

For my final project, I wanted to do a full face prosthetic appliance. I've shown the steps of life casting my girlfriend's face, and now is the moment to show what I learned and gained from my first round of schooling in special effects make-up. This would be the ultimate test of how far I could push myself to deliver a quality look, unassisted, in three hours.

I wanted to create a Zombie, but I also wanted to put my own spin on it. Something horrifying, but not yet repulsive. Like scary magic. I decided to draw inspiration from Michael Jackson's THRILLER and the cult film classic EVIL DEAD 2. I wanted to marry the sunken lifelessness of Michael with the over exaggerated horror of a Deadite. Using this as a template I embarked on many sculptings of how to make this happen.























The perfect inspiration.


The perfect model; a clean face with no make-up or acne treatments present. Some acne treatments have been known to cause an adverse burning sensation when working in these special effects make-up scenarios.

I begin applying the latex face piece by first brushing a border of Pros-Aide on the inside edges of the appliance. Working from the middle of the nose and the forehead, I secured the piece. I secured further along the cheeks and temples.

I designed the piece to be two parts; a face piece and a chin cap. This would allow for full range of the mouth for snarls, eating/breathing, etc. This was important in keeping a very humanistic look to my creature design. Ideally I would have loved to have also crafted a set of fangs/jagged teeth, but time was against me with only having two weeks to execute this entire set of materials. You do know I've never done any of this before right?

When pouring my liquid latex to craft the appliance the weather was dipping below freezing. This added quit a bit of time to the cuing process. I initially did a dump pour to build my layers, but in hindsight, if I would have had the extra time I would have brushed on the latex in layers to insure more even flow to the piece, particularly the edges.
In the end the appliance is about 2x too thick, but I countered the stiff edges by using additional liquid latex to adhere torn strips of Kleenex to bridge the appliance to the skin.

I used this tissue method along the mouth and the eyelids as well. This helped blend the look of the upper face piece and the lower chin cap.

I then began the time consuming process of painting the entire latex appliance. Next time I would definitely cast in gelatin to cut down on the weight of the piece and the tedious process of painting. It would add a bit more flexibility as well when gluing it down.

This was a worthwhile lesson as I learned to take my time and work the colors.

I always have a difficult time matching skin tone with grease paints. They recommend a mix of three colors to balance it out, but I always find myself using 4-5. The trick is playing with light and shadow and using those colors to create that. It all comes from blending....

...Blending....

....shading & blending darker....

...and darker.

For the eyes, I went with a three toned purple. It lends a sense of disturbing feminity to it I think.

Here I added a bit of black to the nose cavity, lips and neckline. The neck is key as the eyes wander and takes in objects as a whole to perceive an image. Rewatch the original DAWN OF THE DEAD and almost all the zombie make-up you see stops at the chin line. That'll save time and materials, but you never want to do anything half-assed.



Here are a few make-up designs from some of my fellow classmates.


































A whipped lacerated back was created by Erin Ausfeld. She also did the gory nail-gun accident depicted below.



















 Jacqueline Olszewski - She crafted these fantastic boils by dropping liquid gelatin on tin foil and letting it cure. Amazing results!



Cindy Sanabria did up a piece of wax work that recalls the glory days of CANNIBAL FEROX.


Kevin English crafted a skinned hand, full of tendons and gore.


Here's a few snapshots of my finished results. To hide the seams along the hairline that I wasn't able to cover with Eva's natural hair, I thought quickly on my feet and pulled off my ski mask for her to wear. Instant fix.





From start to finish I used every second of our 3 hour class to achieve this look. I feel I really pushed myself and was able to significantly capture what I had planned in my mind's eye.

Clean up was a gentle peeling away of the latex, and a few baby wipes to take off the color.


I love the remnant piece left behind. It looks like it came straight from the set of TEXAS CHAINSAW MASSACRE. I can now attach some elastic bands and have a half mask. I would probably deconstruct the jawline for better stability.






















BEFORE -----------------------------------------------------------------------------------------------------AFTER




I want to give a big thank you to Eva for being a trooper. I now know what tattoo artists refer to when they say their clients "sat like a champ". A big thank you to all my classmates that made learning fun. It honestly played like group therapy for horror junkies. And a big thank you to Carl Paulino, my instructor. I truly hope that they offer the ADVANCED SPECIAL EFFECTS MAKE-UP class so I can continue this new passion.

Stay tuned as I have several new projects on the horizon.

Wednesday, December 16, 2009

Zombies and Hammers

After this post, it's official; one last class on the horizon. I'm still prepping my facial appliance for our final design, but for this last class we focused on the techniques that we learned throughout the weeks. We had an open forum of questions about methods and materials and the best way to tackle certain effects. This included trouble shooting monster suits like Swamp Thing, underwater effects like Fulci's ZOMBIE, and the all kinds of hell Lon Chaney Jr. would put himself through for his craft. This all revolved my favorite piece of mythology; ZOMBIES!

Jacqueline showed me an awesome tip to create veins. Simply take a blue eyeliner and freehand. PRESTO! So easy and quick, don't know why I didn't think of that. Add a dash of powder to bring down the hue and instant veins that any junkie would crave.

Jacqueline also has a new video up on YouTube and if you aren't subscribing to her channel yet, you should.




Kevin was nominated to be our guinea pig. Carl discussed and reviewed several techniques we learned to create an out of kit zombie.


Kevin's face become a quick mish-mash of half done effects to create the walking dead. A quick gelatin mold was cast to make a bulging brain. A balloon and pump can be laid underneath to allow for a pulsating wound. A gelatin worm was glued to his cheek and added a dimension of movement to the effect. Toilet paper and corn flakes applied with liquid latex and painted up is one of the cheapest effects I can attest to as being the most realistic, especially in regards to time. A couple lines on the lip with red and black give a split lip. A blending of black around the eyes deepens the sockets and adds a hollowed look. Adding black eye liner under AND above the lashes will take away any redness that remains.

Here's my sculpted piece with walls built up out of clay. This took about a pound of clay for the sculpt and the walls, but it can all be reused when pulled away. I mixed up about a half pound of Ultracal 30 and poured til all of my sculpt was covered. Due to the cold weather I allowed for two days to fully cure to get out all of the moisture.

You'll notice that I built an almost bowl shape, which worked against me. Take note and safe yourself some elbow grease and heart ache. I should've built up more of a rectangle like box with my walls to allow for easier separation. When I peeled back my clay, I saw that my sculpt and my mold had vacuumed sealed together. I attempted to chisel it out, but in the end it came down to brute force and sacrifice. I took a hammer and as gently as I could, smashed through the bottom base my zombie sculpt. I knew my impression of the zombie piece was completely cured, but I needed that piece more than my original sculpt. I still have the silicone mold of Eva's face if I need to pour another, an option I wouldn't have if I would've taken her impression with Algaenate. Always think of contingencies.

After pulling out the broken pieces of my girlfriend's face, I took up my loop tool and scraped away all the residual clay that was hiding in the nooks and crannies of my zombie sculpt.

Here's a side view to showcase some of the detail of my zombie. I currently have a second coat of liquid latex currently curing on the mold I pulled from this positive. I'll update again with pics of the final effect.

Thursday, December 10, 2009

On my Own

So class was cancelled for this past Monday, but it gave me the opportunity to begin my preparations my final project. Basically the last class we are given the entire 3 hour block of time to utilize all the skills we have learned to present a special effects make-up design of our own creation. I want to turn my girlfriend into a zombie.

To accomplish this, I need to start with the fundamentals. Life casting + sculpting = success ?



Here she is, in all her Kojak-like glory, my love, Eva. She was kind enough to put up with me casting her face and coming in for my final class for the application of the prosthetic I hope to build. Be sure that your model has no make-up or acne treatments on their face. Some acne treatments can have an adverse reaction to certain chemicals and cause a burning irritation. This is also said for skin that has recently undergone a chemical peel or similar procedures.

I applied a bald cap and glued down around her ears and forehead. I marked with a sharpie where her hairline is so as to not sculpt a piece that goes beyond that. She's a trooper for putting up with me. Be sure to apply ample release agent a.k.a petroleum jelly to the eyebrows and eyelashes with a small brush.

I used an equal parts mixed silicone called Body Double. One part is bright pink and the other is electric blue. Mix equal parts of each together in a separate container and stir until it's a nice purple hue. This means it's properly mixed and ready for application.

This stuff is a bit sticky, so if you get any on clothes or other surfaces, wait until it's dry and you can peel it off, rather than smearing it about in its wet state. It works best to apply in small patches and smooth out with a small spatula to decrease air bubbles. It takes less than 30 minutes to cure, and once it wasn't tactile anymore I applied several layers of plaster strips to create my supportive Mother Mold. Once that was dry, I was able to pull the mold from my model.

I then mixed a batch of UltraCal 30 and poured into my mold and let it cure. Once it was dry this is what I pulled out. A few spots are needed to be chased out, but over all a very solid pour. I had a bit of difficulty with Eva's nose. Basically her left nostril became slightly obstructed, very similar to what happened with Carl in our first lesson with life casting. I pulled it make her more comfortable, remember your model is always more important than your mold.


I used the flat head end of a screwdriver as a chisel and a hammer and chased away all the excess areas of my face cast. I used a small nail file to smooth out certain edges along the eyes and nose.


Here I began my sculpting using an oil based clay. It works a bit better once you roll it in your hands and heat it up a bit. There is nothing quite as meditative as just sitting and creating with your hands what is in your head.


I want an almost skeletal look to the face. This means building out the eye sockets in particular and sculpting a slightly slanted forehead coupled with narrowed temples. I also hyper-extended the cheekbones.


To fix the problem with the nose I sculpted a grizzly socket of where one should be. I built up the nose to where it would be on her face and then added a bit more clay and sculpted it from there. The idea is for it to fit directly over her nose like a cap. And I made sure to exaggerate the nostrils to ample breathing.

The chin I sculpted as a separate piece. In my design, I want Eva to have full range of movement with her mouth, which latex and other materials would slightly hindered if this was one solid piece. This will lend to awesome chomps and snarls for future photos. Ideally if I had enough time and training I would also sculpt and cast teeth. One day soon, perhaps.

I decided to add a bit more of an under bridge to the base of my eye sockets. This draws the eye to the mouth and works in the rule of 45 degrees. You want your character to look evil/scary, position their eyebrows/eyes at a 45 degree angle. Works every time. The chin is almost to a point, with a Bruce Campbell like bulge. I will then blend the two pieces together with liquid latex and make-up once cast.

But the first thing now is to cast a mold my sculpt. Don't put the cart before the horse or more appropriately, don't congratulate survival when there's zombies still out there.

Wednesday, December 2, 2009

There's always room for Gelatin

From last week we cast and applied our hand sculpts in liquid latex. This week we used the same mold with a different material, Gelatin, with very different results.

First we prepped our hand cast, which is my base mold, by drilling a hole through the center where it aligned with mold I had previously used. It's very important to line it up and mark with a pencil as this hole should line up directly over the center of your sculpt. This hole will act as the injection point.

With a much smaller drill bit, I drilled three release holes into my cast mold. These serve as the release holes so you piece doesn't suction together. The mold and the hand piece are coated in a release agent. In this instance, we used PAM cooking spray.

Here Carl preps the molds for injection. With gelatin, a little bit goes a long way. This is cosmetic gelatin, not jell-o, so be sure you're purchasing the correct supplies. It has to be heated to a melted degree, but this is easy with a microwave and a microwave safe bowl. You can use a double-boiler method like you would with chocolate if you don't have a microwave handy. Keep a very close eye on this, burnt gelatin stinks like no other and wastes material. Undercooked and it won't properly flow within your mold. Be mindful of the material in this state as it can and will burn if mishandled.

You can use an injection syringe found at Compleat Sculptor or check your local hardware stores, medical supply stores, and bakery stores to find what will work for you. If you're in the New York City area or not, Compleat Sculptor has the inventory and know-how for all your mold-making and prop fabrication. Be sure you obtain a syringe that can within stand the heat of liquid gelatin. A clear one is ideal as you can see how much material you have and what you have left after injecting your mold. As you squeeze in your material, check on the underside of your mold to see the gelatin poke through your release holes, which also serve to let you know when the mold is full.

Here's my mold, taped together to prevent any shifting of material. Using clear tape lets you see exactly when it becomes filled. Simply poke a hole through at your injection point and fire away. We sped up the process of waiting for the gelatin to cool by simply sticking them into the refrigerator. Allow about 15-20 minutes to properly cure. A helpful tip is to leave a bit out at room temperature. When it's effectively cured, you'll be positive those in the ice box are ready for you.


When pulling the mold apart, use a pair of scissors to snip the piece of your injection hole that may not separate. These excess pieces will be further trimmed away, but you want to ensure a proper separation of your mold and material.
This crude illustration of mine illustrates how your mold edges should look. The material should smooth out to the edges, rather than being plopped down like a wad of pizza dough.

The peel is the same as latex, brushing with powder as you gently pull. Exercise caution as gelatin is a bit more susceptible to tearing than latex.
This illustration shows the excess areas of material to be trimmed. When powdering and rolling the prosthetic be careful of the pieces of material from your release holes that may not want to separate. Simply use scissors to snip them away.


Here's the pulled piece. It's a tad bit smaller than my latex one from previously, but then I did paint on latex past the edges. Take the moment to trim the excess pieces of each side from your injection hole and release holes. Add a touch of powder to these spots and you're ready for application.


Application is a dab of ProsAide on the back of the hand, and a bit on the under side of your prosthetic and around the edges. Your edges can be blended after being glued down with a paint brush and warm water. This helps smooth and dissolve the edges to a feathering unrivaled to latex.


Due to the translucent nature of the gelatin, the paint up was really a breeze. I usually spend half my time trying to match my skin tone, but here it shined through and some simple brush ups around the edges blended the effect to the rest of my hand.


Not all molds were probably meant for this material. Here, Erin, who did the fabulous scratches that Becky liked so much, showed what a trooper and artist she was. Having some trouble with the injection of her mold, she salvaged the pieces to create an extremely gnarly set of puncture wounds. This was very interesting to see the same piece used in an entirely new way.

Jacqueline's puncture wound/bullet hole gets better every time. Kinda makes you wanna flip here wrist and see what's protruding from the other side.

Here's my scarification all painted up. I really like the sense of swelling and raised tissue.


I used a flat edge of a sponge and some red paint to streak a line about 2 centimeters away from the edges. I then smudged away from the cut, and blended out into my normal skin. This created a sense of redness that I think really shines through.


The last key ingredient in any successful special effect: BLOOD. I decided to apply a bit less than last time, but blended it out as well to give it a look of "holy hell, this just happened, stop the bleeding" smear.
And there you have it, another successful pull and application from the same mold. I really enjoyed working with the gelatin, it had more of a flesh like property to it and led to a more convincing believability with the effect. It is a bit more work and preparation, but if you have the time to plan it out, I feel it'll deliver every time.

Clean up is the same as latex; simply peel away and wipe with Bond Off and a baby wipe. The gelatin tends to "chunk" away rather than peeling off in one piece like latex, so take your time if you want to save that as a souvenir.